APN Settings for Globe Mobile Carriers

The APN or Access Point Name is the network or carrier your mobile devices use for internet access. Usually, you don’t have to configure the APN setting because it’s configured for you automatically. However, when you buy an unlocked device, such as mobile hotspot, LTE CPE, USB dongle or mobile phones, and you want to use these devices with different carrier’s SIM cards, the APN setting thing is very critical which decides whether you get a data connection or not after switching to a new network. Below are the APN setting parameters for different carriers in all over the world.

If you want to buy unlocked LTE CPE, USB modem or unlocked LTE MiFi, please go to search on our site https://www.store4g.com/. Continue reading “APN Settings for Globe Mobile Carriers”

Netgear Nighthawk M1 APN Settings

The Access Point Name (APN) is the name for the settings your mobile devices read to set up a connection to the gateway between your carrier’s cellular network and the Internet. It needs to be correctly set up on your phone, tablet or mobile broadband devices to access the internet on specific carrier’s network.
If you want to use the Netgear Nighthawk M1 mobile router to different carriers, you have to change the APN settings on your M1 correctly at first.

There are two ways for you to add or modify the APN settings for the M1. Check it and do the settings at your side before accessing the mobile Internet.

APN Settings via NETGEAR Mobile App
1. Connect to the M1 mobile router’s WiFi network with a mobile device.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
4. Tap Settings > Cellular > APN.
5. Tap +, and the Add a new APN page displays.
6. Tap Add after completing the settings. Then the new APN is added. Continue reading “Netgear Nighthawk M1 APN Settings”