APN Settings for Globe Mobile Carriers

The APN or Access Point Name is the network or carrier your mobile devices use for internet access. Usually, you don’t have to configure the APN setting because it’s configured for you automatically. However, when you buy an unlocked device, such as mobile hotspot, LTE CPE, USB dongle or mobile phones, and you want to use these devices with different carrier’s SIM cards, the APN setting thing is very critical which decides whether you get a data connection or not after switching to a new network. Below are the APN setting parameters for different carriers in all over the world.

If you want to buy unlocked LTE CPE, USB modem or unlocked LTE MiFi, please go to search on our site https://www.store4g.com/. Continue reading “APN Settings for Globe Mobile Carriers”

How to Enable VPN for Netgear Nighthawk M1

Using a VPN service could secure your computer’s internet connection to guarantee that all of the data you’re sending and receiving is encrypted and secured from prying eyes. With an Ethernet port, the Netgear Nighthawk M1 provides a way to establish a vpn tunnel to a corporate network.

To connect to a corporate network using VPN, you must first enable VPN service. Please use the following steps to enable the VPN service.

1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
Continue reading “How to Enable VPN for Netgear Nighthawk M1”

Netgear Nighthawk M1 APN Settings

The Access Point Name (APN) is the name for the settings your mobile devices read to set up a connection to the gateway between your carrier’s cellular network and the Internet. It needs to be correctly set up on your phone, tablet or mobile broadband devices to access the internet on specific carrier’s network.
If you want to use the Netgear Nighthawk M1 mobile router to different carriers, you have to change the APN settings on your M1 correctly at first.

There are two ways for you to add or modify the APN settings for the M1. Check it and do the settings at your side before accessing the mobile Internet.

APN Settings via NETGEAR Mobile App
1. Connect to the M1 mobile router’s WiFi network with a mobile device.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
4. Tap Settings > Cellular > APN.
5. Tap +, and the Add a new APN page displays.
6. Tap Add after completing the settings. Then the new APN is added. Continue reading “Netgear Nighthawk M1 APN Settings”

Netgear Nighthawk M1 Data Offloading

Data Offloading reduces the amount of data being carried on the cellular bands, freeing bandwidth for other users. It is also used in situations where local cell reception may be poor, allowing the user to connect via wired services with better connectivity. The data offloading of Netgear Nighthawk M1 lets you transfer the Internet connection from mobile broadband to another WiFi or Ethernet connection. You might want to use this feature if you are in an area in which many others are using cellular connections at the same time or in areas with poor cellular reception.

Ethernet offloading Mode
You can use the micro USB port for AC charging and you can use the USB type A port to jump boost a device or to connect a USB device.
Continue reading “Netgear Nighthawk M1 Data Offloading”

How to Check Your Data Usage on Nighthawk M1

If you, like many of us, have a limited cellular data plan, monitoring your data usage is essential. For the Netgear MR1100 router, You can view an estimate of your data usage on the mobile router LCD, from the NETGEAR Mobile app, and on the mobile router web page.

View Data Usage on the M1 LCD
This is the easiest way to view estimated data usage on the mobile router LCD:
Continue reading “How to Check Your Data Usage on Nighthawk M1”

How to Recharge Netgear Nighthawk M1

There are a USB Type-A and USB Type-C ports with the Netgear Nighthawk M1 mobile router. You could recharege the battery with the USB Type-C port which allows you to recharge the battery from a wall socket or from a computer. However, recharging from a wall socket is faster than recharging from a USB port. As the Nighthawk M1 mobile router supports Quick Charge 2.0 technology. You can charge the it with a Quick Charge–certified adapter, which charges the battery up to 75 percent faster than regular power adapters.

Recharge the Battery of Nighthawk M1 From a Wall Socket

1. Attach one end of the micro USB cable to the connector on the right on the M1 and attach the other end to the wall charger (included).
Continue reading “How to Recharge Netgear Nighthawk M1”