Huawei E5172 Dynamic Routing Configuration

This dynamic routing function of E5172 Huawei router is enabled when cascaded routers are used on the LAN and the cascaded routers comply with the Routing Information Protocol (RIP). Steps to configure dynamic routing settings:
1. Choose LAN > Dynamic Routing.
The Dynamic Routing page is displayed.
2. Select the Enable check box next to RIP.
3. Set Operation. If it is set to Active, the CPE actively makes route changes and notifies surrounding routers of the changes. If it is set to Passive, the CPE does not make route changes until it is notified.
4. Set Version to RIP v1, RIP v2, or RIP v1/RIP v2.

Read the rest of this entry

,

Huawei E5172 4G router is powerful LTE CAT4 4G wireless router that enables users to configure DHCP settings, such as changing the IP address of CPE, bundling an IP address with a device based on its MAC address, static routing, dynamatic routing and more This article will show you how to change the IP address of the E5172 router and configure DHCP settings.

Change the IP address of the Huawei E5172 CPE

You can change the host IP address to another individual IP address that is easy to remember. Make sure the IP address is unique on your network. If you change the IP address of the CPE, access the web UI with the new IP address. Here are the steps:

Read the rest of this entry

,

The APN or Access Point Name is the network or carrier your Internet provider accesses for data. Usually you don’t have to touch the APN setting because it’s configured for you automatically. When you can’t get a data connection after switching to a new network, or to use a different carrier’s SIM card on an unlocked 4G router, the APN setting could help you enter into the proper network without problem. Here’s guide to configure the APN settings on your Huawei E5172 4G LTE CPE.

Please login the web mangement system before doing all the settings.

1How to Create an APN Profile for E5172

Read the rest of this entry

, ,